Thank you for purchasing our security DVR system!
In this article, we will show you how to connect and set up your new devices.
So you've already mapped out your prospective spots for cameras, and have a monitor or TV to work with. Now it's finally time to get installing!
1. DVR System x 1
2. Cameras x 4 or 8 (depending on kit purchased, see box for details)
3. 18 meter video/power siamese coax cables x 4 or 8 (matches camera numbers)
4. Power adapter x 1 or 2 if using larger sets
5. Mouse x 1
6. HDMI cable x 1
7. RJ45 Ethernet cable x 1
8. Setup manual x 1
Note: first, try setting up the cables to get comfortable with how they connect. Afterwards, you can decide how your cables will run through the building.
Note: repeat steps 3 and 4 for each camera you plan to use.
Note 2: please also refer to our camera mounting guide!
Note: you may hear a series of beeping from the system. This is the Local Buzzer Alarm, which is completely normal and will happen during startup and specific times that you set.
Note 1: if you see a login screen, just leave the login ID as "admin", and keep the password blank. You can set your own password later!
Note 2: the above page may look different based on which DVR app version is running. However, you will always see either "SN" or "Serial Number" above this patch.
Your local security center is now up and running!
Next, we will set up the smartphone app so you can view security footage on the go. Click here!